#include <stdlib.h>
#include <inttypes.h>
#include <string.h>
#include <stdio.h>
#include "floating_fudge.h"
#include "spandsp/telephony.h"
#include "spandsp/logging.h"
#include "spandsp/complex.h"
#include "spandsp/vector_float.h"
#include "spandsp/complex_vector_float.h"
#include "spandsp/vector_int.h"
#include "spandsp/complex_vector_int.h"
#include "spandsp/async.h"
#include "spandsp/power_meter.h"
#include "spandsp/arctan2.h"
#include "spandsp/dds.h"
#include "spandsp/complex_filters.h"
#include "spandsp/v29rx.h"
#include "spandsp/v17tx.h"
#include "spandsp/v17rx.h"
#include "v17tx_constellation_maps.h"
#include "v17rx_constellation_maps.h"
#include "v17rx_floating_rrc.h"
Defines | |
#define | CARRIER_NOMINAL_FREQ 1800.0f |
#define | BAUD_RATE 2400 |
#define | EQUALIZER_DELTA 0.21f |
#define | EQUALIZER_SLOW_ADAPT_RATIO 0.1f |
#define | V17_TRAINING_SEG_1_LEN 256 |
#define | V17_TRAINING_SEG_2_LEN 2976 |
#define | V17_TRAINING_SHORT_SEG_2_LEN 38 |
#define | V17_TRAINING_SEG_3_LEN 64 |
#define | V17_TRAINING_SEG_4A_LEN 15 |
#define | V17_TRAINING_SEG_4_LEN 48 |
#define | V17_BRIDGE_WORD 0x8880 |
#define | V17_EQUALIZER_LEN (V17_EQUALIZER_PRE_LEN + 1 + V17_EQUALIZER_POST_LEN) |
#define | SYNC_LOW_BAND_EDGE_COEFF_0 1.764193f |
#define | SYNC_LOW_BAND_EDGE_COEFF_1 -0.980100f |
#define | SYNC_HIGH_BAND_EDGE_COEFF_0 -1.400072f |
#define | SYNC_HIGH_BAND_EDGE_COEFF_1 -0.980100f |
#define | SYNC_CROSS_CORR_COEFF_A -0.932131f |
#define | SYNC_CROSS_CORR_COEFF_B 0.700036f |
#define | SYNC_CROSS_CORR_COEFF_C -0.449451f |
Enumerations | |
enum | { TRAINING_STAGE_NORMAL_OPERATION = 0, TRAINING_STAGE_SYMBOL_ACQUISITION, TRAINING_STAGE_LOG_PHASE, TRAINING_STAGE_SHORT_WAIT_FOR_CDBA, TRAINING_STAGE_WAIT_FOR_CDBA, TRAINING_STAGE_COARSE_TRAIN_ON_CDBA, TRAINING_STAGE_FINE_TRAIN_ON_CDBA, TRAINING_STAGE_SHORT_TRAIN_ON_CDBA_AND_TEST, TRAINING_STAGE_TRAIN_ON_CDBA_AND_TEST, TRAINING_STAGE_BRIDGE, TRAINING_STAGE_TCM_WINDUP, TRAINING_STAGE_TEST_ONES, TRAINING_STAGE_PARKED } |
Functions | |
float | v17_rx_carrier_frequency (v17_rx_state_t *s) |
float | v17_rx_symbol_timing_correction (v17_rx_state_t *s) |
float | v17_rx_signal_power (v17_rx_state_t *s) |
void | v17_rx_signal_cutoff (v17_rx_state_t *s, float cutoff) |
int | v17_rx_equalizer_state (v17_rx_state_t *s, complexf_t **coeffs) |
Get a snapshot of the current equalizer coefficients. | |
int | v17_rx (v17_rx_state_t *s, const int16_t amp[], int len) |
Process a block of received V.17 modem audio samples. | |
void | v17_rx_set_put_bit (v17_rx_state_t *s, put_bit_func_t put_bit, void *user_data) |
Change the put_bit function associated with a V.17 modem receive context. | |
void | v17_rx_set_modem_status_handler (v17_rx_state_t *s, modem_tx_status_func_t handler, void *user_data) |
Change the modem status report function associated with a V.17 modem receive context. | |
int | v17_rx_restart (v17_rx_state_t *s, int bit_rate, int short_train) |
Reinitialise an existing V.17 modem receive context. | |
v17_rx_state_t * | v17_rx_init (v17_rx_state_t *s, int bit_rate, put_bit_func_t put_bit, void *user_data) |
Initialise a V.17 modem receive context. | |
int | v17_rx_free (v17_rx_state_t *s) |
Free a V.17 modem receive context. | |
void | v17_rx_set_qam_report_handler (v17_rx_state_t *s, qam_report_handler_t handler, void *user_data) |
int v17_rx | ( | v17_rx_state_t * | s, | |
const int16_t | amp[], | |||
int | len | |||
) |
Process a block of received V.17 modem audio samples.
Process a block of received V.17 modem audio samples.
s | The modem context. | |
amp | The audio sample buffer. | |
len | The number of samples in the buffer. |
References v17_rx_state_t::agc_scaling, v17_rx_state_t::agc_scaling_save, v17_rx_state_t::bit_rate, v17_rx_state_t::carrier_drop_pending, v17_rx_state_t::carrier_phase, v17_rx_state_t::carrier_phase_rate, dds_advance(), dds_advancef(), dds_lookup_complexf(), v17_rx_state_t::eq_put_step, v17_rx_state_t::high_sample, complexf_t::im, v17_rx_state_t::last_sample, v17_rx_state_t::low_samples, v17_rx_state_t::power, power_meter_init(), power_meter_update(), complexf_t::re, v17_rx_state_t::rrc_filter, v17_rx_state_t::rrc_filter_step, v17_rx_state_t::short_train, SIG_STATUS_CARRIER_DOWN, SIG_STATUS_CARRIER_UP, v17_rx_state_t::signal_present, v17_rx_state_t::symbol_sync_high, v17_rx_state_t::symbol_sync_low, v17_rx_state_t::training_stage, v17_rx_restart(), vec_circular_dot_prodf(), and vec_circular_dot_prodi16().
float v17_rx_carrier_frequency | ( | v17_rx_state_t * | s | ) |
Get the current received carrier frequency.
s | The modem context. |
References v17_rx_state_t::carrier_phase_rate, and dds_frequencyf().
int v17_rx_equalizer_state | ( | v17_rx_state_t * | s, | |
complexf_t ** | coeffs | |||
) |
Get a snapshot of the current equalizer coefficients.
Get a snapshot of the current equalizer coefficients.
s | The modem context. | |
coeffs | The vector of complex coefficients. |
References v17_rx_state_t::eq_coeff.
int v17_rx_free | ( | v17_rx_state_t * | s | ) |
Free a V.17 modem receive context.
Free a V.17 modem receive context.
s | The modem context. |
v17_rx_state_t* v17_rx_init | ( | v17_rx_state_t * | s, | |
int | bit_rate, | |||
put_bit_func_t | put_bit, | |||
void * | user_data | |||
) |
Initialise a V.17 modem receive context.
Initialise a V.17 modem receive context.
s | The modem context. | |
bit_rate | The bit rate of the modem. Valid values are 7200, 9600, 12000 and 14400. | |
put_bit | The callback routine used to put the received data. | |
user_data | An opaque pointer passed to the put_bit routine. |
References v17_rx_state_t::agc_scaling, v17_rx_state_t::agc_scaling_save, v17_rx_state_t::carrier_phase_rate_save, dds_phase_ratef(), v17_rx_state_t::logging, v17_rx_state_t::put_bit, v17_rx_state_t::put_bit_user_data, v17_rx_state_t::short_train, v17_rx_restart(), and v17_rx_signal_cutoff().
int v17_rx_restart | ( | v17_rx_state_t * | s, | |
int | bit_rate, | |||
int | short_train | |||
) |
Reinitialise an existing V.17 modem receive context.
Reinitialise an existing V.17 modem receive context.
s | The modem context. | |
bit_rate | The bit rate of the modem. Valid values are 7200, 9600, 12000 and 14400. | |
short_train | TRUE if a short training sequence is expected. |
References v17_rx_state_t::agc_scaling, v17_rx_state_t::agc_scaling_save, v17_rx_state_t::angles, v17_rx_state_t::baud_half, v17_rx_state_t::baud_phase, v17_rx_state_t::bit_rate, v17_rx_state_t::bits_per_symbol, v17_rx_state_t::carrier_drop_pending, v17_rx_state_t::carrier_phase, v17_rx_state_t::carrier_phase_rate, v17_rx_state_t::carrier_phase_rate_save, v17_rx_state_t::carrier_track_i, v17_rx_state_t::carrier_track_p, v17_rx_state_t::constellation, dds_frequencyf(), dds_phase_ratef(), v17_rx_state_t::diff, v17_rx_state_t::distances, v17_rx_state_t::full_path_to_past_state_locations, v17_rx_state_t::high_sample, v17_rx_state_t::last_sample, v17_rx_state_t::logging, v17_rx_state_t::low_samples, v17_rx_state_t::past_state_locations, v17_rx_state_t::power, power_meter_init(), v17_rx_state_t::rrc_filter, v17_rx_state_t::rrc_filter_step, v17_rx_state_t::scramble_reg, v17_rx_state_t::short_train, v17_rx_state_t::signal_present, v17_rx_state_t::space_map, span_log(), v17_rx_state_t::start_angles, v17_rx_state_t::symbol_sync_dc_filter, v17_rx_state_t::symbol_sync_high, v17_rx_state_t::symbol_sync_low, v17_rx_state_t::total_baud_timing_correction, v17_rx_state_t::training_count, v17_rx_state_t::training_error, v17_rx_state_t::training_stage, and v17_rx_state_t::trellis_ptr.
Referenced by v17_rx(), and v17_rx_init().
void v17_rx_set_modem_status_handler | ( | v17_rx_state_t * | s, | |
modem_rx_status_func_t | handler, | |||
void * | user_data | |||
) |
Change the modem status report function associated with a V.17 modem receive context.
Change the modem status report function associated with a V.17 modem receive context.
s | The modem context. | |
handler | The callback routine used to report modem status changes. | |
user_data | An opaque pointer. |
References v17_rx_state_t::status_handler, and v17_rx_state_t::status_user_data.
void v17_rx_set_put_bit | ( | v17_rx_state_t * | s, | |
put_bit_func_t | put_bit, | |||
void * | user_data | |||
) |
Change the put_bit function associated with a V.17 modem receive context.
Change the put_bit function associated with a V.17 modem receive context.
s | The modem context. | |
put_bit | The callback routine used to handle received bits. | |
user_data | An opaque pointer. |
References v17_rx_state_t::put_bit, and v17_rx_state_t::put_bit_user_data.
void v17_rx_set_qam_report_handler | ( | v17_rx_state_t * | s, | |
qam_report_handler_t | handler, | |||
void * | user_data | |||
) |
Set a handler routine to process QAM status reports
s | The modem context. | |
handler | The handler routine. | |
user_data | An opaque pointer passed to the handler routine. |
References v17_rx_state_t::qam_report, and v17_rx_state_t::qam_user_data.
void v17_rx_signal_cutoff | ( | v17_rx_state_t * | s, | |
float | cutoff | |||
) |
Set the power level at which the carrier detection will cut in
s | The modem context. | |
cutoff | The signal cutoff power, in dBm0. |
References v17_rx_state_t::carrier_off_power, v17_rx_state_t::carrier_on_power, and power_meter_level_dbm0().
Referenced by v17_rx_init().
float v17_rx_signal_power | ( | v17_rx_state_t * | s | ) |
Get a current received signal power.
s | The modem context. |
References v17_rx_state_t::power, and power_meter_current_dbm0().
float v17_rx_symbol_timing_correction | ( | v17_rx_state_t * | s | ) |
Get the current symbol timing correction since startup.
s | The modem context. |
References v17_rx_state_t::total_baud_timing_correction.