async.h File Reference

Go to the source code of this file.

Classes
struct	async_tx_state_t
struct	async_rx_state_t
Typedefs
typedef void(*	put_msg_func_t )(void *user_data, const uint8_t *msg, int len)
typedef int(*	get_msg_func_t )(void *user_data, uint8_t *msg, int max_len)
typedef void(*	put_byte_func_t )(void *user_data, int byte)
typedef int(*	get_byte_func_t )(void *user_data)
typedef void(*	put_bit_func_t )(void *user_data, int bit)
typedef int(*	get_bit_func_t )(void *user_data)
typedef int(*	modem_tx_status_func_t )(void *user_data, int status)
typedef int(*	modem_rx_status_func_t )(void *user_data, int status)
Enumerations
enum	{   SIG_STATUS_CARRIER_DOWN = -1, SIG_STATUS_CARRIER_UP = -2, SIG_STATUS_TRAINING_IN_PROGRESS = -3, SIG_STATUS_TRAINING_SUCCEEDED = -4,   SIG_STATUS_TRAINING_FAILED = -5, SIG_STATUS_FRAMING_OK = -6, SIG_STATUS_END_OF_DATA = -7, SIG_STATUS_ABORT = -8,   SIG_STATUS_BREAK = -9, SIG_STATUS_SHUTDOWN_COMPLETE = -10, SIG_STATUS_OCTET_REPORT = -11 }
enum	{ ASYNC_PARITY_NONE = 0, ASYNC_PARITY_EVEN, ASYNC_PARITY_ODD }
Functions
const char *	signal_status_to_str (int status)
	Convert a signal status to a short text description.
async_tx_state_t *	async_tx_init (async_tx_state_t *s, int data_bits, int parity_bits, int stop_bits, int use_v14, get_byte_func_t get_byte, void *user_data)
	Initialise an asynchronous data transmit context.
int	async_tx_get_bit (void *user_data)
	Get the next bit of a transmitted serial bit stream.
async_rx_state_t *	async_rx_init (async_rx_state_t *s, int data_bits, int parity_bits, int stop_bits, int use_v14, put_byte_func_t put_byte, void *user_data)
	Initialise an asynchronous data receiver context.
void	async_rx_put_bit (void *user_data, int bit)
	Accept a bit from a received serial bit stream.

---

Detailed Description

---

Typedef Documentation

typedef int(* get_bit_func_t)(void *user_data)

Bit get function for data pumps

typedef int(* get_byte_func_t)(void *user_data)

Byte get function for data pumps

typedef int(* get_msg_func_t)(void *user_data, uint8_t *msg, int max_len)

Message get function for data pumps

typedef int(* modem_rx_status_func_t)(void *user_data, int status)

Completion callback function for rx data pumps

typedef int(* modem_tx_status_func_t)(void *user_data, int status)

Completion callback function for tx data pumps

typedef void(* put_bit_func_t)(void *user_data, int bit)

Bit put function for data pumps

typedef void(* put_byte_func_t)(void *user_data, int byte)

Byte put function for data pumps

typedef void(* put_msg_func_t)(void *user_data, const uint8_t *msg, int len)

Message put function for data pumps

---

Enumeration Type Documentation

anonymous enum

Special "bit" values for the bitstream put and get functions, and the signal status functions.

Enumerator:

SIG_STATUS_CARRIER_DOWN	The carrier signal has dropped.
SIG_STATUS_CARRIER_UP	The carrier signal is up. This merely indicates that carrier energy has been seen. It is not an indication that the carrier is either valid, or of the expected type.
SIG_STATUS_TRAINING_IN_PROGRESS	The modem is training. This is an early indication that the signal seems to be of the right type. This may be needed in time critical applications, like T.38, to forward an early indication of what is happening on the wire.
SIG_STATUS_TRAINING_SUCCEEDED	The modem has trained, and is ready for data exchange.
SIG_STATUS_TRAINING_FAILED	The modem has failed to train.
SIG_STATUS_FRAMING_OK	Packet framing (e.g. HDLC framing) is OK.
SIG_STATUS_END_OF_DATA	The data stream has ended.
SIG_STATUS_ABORT	An abort signal (e.g. an HDLC abort) has been received.
SIG_STATUS_BREAK	A break signal (e.g. an async break) has been received.
SIG_STATUS_SHUTDOWN_COMPLETE	A modem has completed its task, and shut down.
SIG_STATUS_OCTET_REPORT	Regular octet report for things like HDLC to the MTP standards.

anonymous enum

Enumerator:

ASYNC_PARITY_NONE	No parity bit should be used
ASYNC_PARITY_EVEN	An even parity bit will exist, after the data bits
ASYNC_PARITY_ODD	An odd parity bit will exist, after the data bits

---

Function Documentation

async_rx_state_t* async_rx_init	(	async_rx_state_t *	s,
		int	data_bits,
		int	parity_bits,
		int	stop_bits,
		int	use_v14,
		put_byte_func_t	put_byte,
		void *	user_data
	)

Initialise an asynchronous data receiver context.

Initialise an asynchronous data receiver context.

Parameters:

	s	The receiver context.
	data_bits	The number of data bits.
	parity_bits	The type of parity.
	stop_bits	The number of stop bits.
	use_v14	TRUE if V.14 rate adaption processing should be used.
	put_byte	The callback routine used to put the received data.
	user_data	An opaque pointer.

Returns:

A pointer to the initialised context, or NULL if there was a problem.

References async_rx_state_t::bitpos, async_rx_state_t::byte_in_progress, async_rx_state_t::data_bits, async_rx_state_t::framing_errors, async_rx_state_t::parity, async_rx_state_t::parity_bit, async_rx_state_t::parity_errors, async_rx_state_t::put_byte, async_rx_state_t::stop_bits, async_rx_state_t::use_v14, and async_rx_state_t::user_data.

Referenced by adsi_rx_init().

void async_rx_put_bit	(	void *	user_data,
		int	bit
	)

Accept a bit from a received serial bit stream.

Accept a bit from a received serial bit stream

Parameters:

	user_data	An opaque point which must point to a receiver context.
	bit	The new bit. Some special values are supported for this field. SIG_STATUS_CARRIER_UP SIG_STATUS_CARRIER_DOWN SIG_STATUS_TRAINING_SUCCEEDED SIG_STATUS_TRAINING_FAILED SIG_STATUS_END_OF_DATA

References ASYNC_PARITY_ODD, async_rx_state_t::bitpos, async_rx_state_t::byte_in_progress, async_rx_state_t::data_bits, async_rx_state_t::framing_errors, async_rx_state_t::parity, async_rx_state_t::parity_bit, async_rx_state_t::parity_errors, async_rx_state_t::put_byte, SIG_STATUS_CARRIER_DOWN, SIG_STATUS_CARRIER_UP, SIG_STATUS_END_OF_DATA, SIG_STATUS_TRAINING_FAILED, SIG_STATUS_TRAINING_IN_PROGRESS, SIG_STATUS_TRAINING_SUCCEEDED, async_rx_state_t::use_v14, and async_rx_state_t::user_data.

Referenced by adsi_rx_init().

int async_tx_get_bit

(

void *

user_data

)

Get the next bit of a transmitted serial bit stream.

Get the next bit of a transmitted serial bit stream.

Parameters:

user_data

An opaque point which must point to a transmitter context.

Returns:

the next bit, or PUTBIT_END_OF_DATA to indicate the data stream has ended.

References ASYNC_PARITY_ODD, async_tx_state_t::bitpos, async_tx_state_t::byte_in_progress, async_tx_state_t::data_bits, async_tx_state_t::get_byte, async_tx_state_t::parity, async_tx_state_t::parity_bit, SIG_STATUS_END_OF_DATA, async_tx_state_t::stop_bits, and async_tx_state_t::user_data.

async_tx_state_t* async_tx_init	(	async_tx_state_t *	s,
		int	data_bits,
		int	parity_bits,
		int	stop_bits,
		int	use_v14,
		get_byte_func_t	get_byte,
		void *	user_data
	)

Initialise an asynchronous data transmit context.

Initialise an asynchronous data transmit context.

Parameters:

	s	The transmitter context.
	data_bits	The number of data bit.
	parity_bits	The type of parity.
	stop_bits	The number of stop bits.
	use_v14	TRUE if V.14 rate adaption processing should be used.
	get_byte	The callback routine used to get the data to be transmitted.
	user_data	An opaque pointer.

Returns:

A pointer to the initialised context, or NULL if there was a problem.

References ASYNC_PARITY_NONE, async_tx_state_t::bitpos, async_tx_state_t::byte_in_progress, async_tx_state_t::data_bits, async_tx_state_t::get_byte, async_tx_state_t::parity, async_tx_state_t::parity_bit, async_tx_state_t::stop_bits, and async_tx_state_t::user_data.

const char* signal_status_to_str

(

int

status

)

Convert a signal status to a short text description.

Convert a signal status to a short text description.

Parameters:

status

The modem signal status.

Returns:

A pointer to the description.

References SIG_STATUS_ABORT, SIG_STATUS_BREAK, SIG_STATUS_CARRIER_DOWN, SIG_STATUS_CARRIER_UP, SIG_STATUS_END_OF_DATA, SIG_STATUS_FRAMING_OK, SIG_STATUS_OCTET_REPORT, SIG_STATUS_SHUTDOWN_COMPLETE, SIG_STATUS_TRAINING_FAILED, SIG_STATUS_TRAINING_IN_PROGRESS, and SIG_STATUS_TRAINING_SUCCEEDED.

Referenced by lapm_receive().