#include <at_interpreter.h>
Public Attributes | |
at_profile_t | p |
int | country_of_installation |
int | dte_inactivity_timeout |
int | dte_inactivity_action |
int | speaker_volume |
int | speaker_mode |
int | dte_rate |
int | dte_char_format |
int | dte_parity |
int | rlsd_behaviour |
int | dtr_behaviour |
int | carrier_loss_timeout |
int | result_code_mode |
int | dsr_option |
int | long_space_disconnect_option |
int | sync_tx_clock_source |
int | rx_window |
int | tx_window |
int | v8bis_signal |
int | v8bis_1st_message |
int | v8bis_2nd_message |
int | v8bis_sig_en |
int | v8bis_msg_en |
int | v8bis_supp_delay |
uint8_t | rx_data [256] |
int | rx_data_bytes |
int | display_call_info |
int | call_info_displayed |
struct at_call_id * | call_id |
char * | local_id |
int | fclass_mode |
int | at_rx_mode |
int | rings_indicated |
int | do_hangup |
int | silent_dial |
int | command_dial |
int | ok_is_pending |
int | dte_is_waiting |
int | rx_signal_present |
TRUE if a carrier is presnt. Otherwise FALSE. | |
int | rx_trained |
TRUE if a modem has trained, Otherwise FALSE. | |
int | transmit |
char | line [256] |
int | line_ptr |
at_modem_control_handler_t * | modem_control_handler |
void * | modem_control_user_data |
at_tx_handler_t * | at_tx_handler |
void * | at_tx_user_data |
at_class1_handler_t * | class1_handler |
void * | class1_user_data |
logging_state_t | logging |
Error and flow logging control. |
Value set by +GCI
Value set by +FIT
Referenced by t31_init().
Value set by +FIT
Value set by L
Value set by M
This is no real DTE rate. This variable is for compatibility this serially connected modems.
Value set by +IPR/+FPR
Value set by +ICF
Value set by +ICF
Value set by &C
Value set by &D
Value set by +FCL
Value set by X
Value set by +IDSR
Value set by +ILSD
Value set by +ICLOK
Value set by +EWIND
Value set by +EWIND
The currently select FAX modem class. 0 = data modem mode.